Remington 870 for IPSC
Remington 870 for IPSC
My friends and I use Remington 870 for IPSC for about 3 years. It requires preparation but then you have extremely reliable and fast shotgun.
What you need to do to prepare Remington 870 for IPSC:
1. Open loading port.
2. Replacing MIM extractor with Non-MIM Extractor.
3. Install oversized safety button.
4. Install light gathering sights.
5. Add standard or telescopic magazine extension.
6. Install long follower.
7. Polish chamber if needed.
8. Replace standard carrier spring with heavier carrier dog spring.
9. Modify the right action bar for fast shooing.
10. Replace standard ejector/ejector spring with 2 3/4 Inch Shells Only ejector/ejector spring.
Big article about Remington 870 modifications for IPSC competitions: Remington 870 for IPSC
What you need to do to prepare Remington 870 for IPSC:
1. Open loading port.
2. Replacing MIM extractor with Non-MIM Extractor.
3. Install oversized safety button.
4. Install light gathering sights.
5. Add standard or telescopic magazine extension.
6. Install long follower.
7. Polish chamber if needed.
8. Replace standard carrier spring with heavier carrier dog spring.
9. Modify the right action bar for fast shooing.
10. Replace standard ejector/ejector spring with 2 3/4 Inch Shells Only ejector/ejector spring.
Big article about Remington 870 modifications for IPSC competitions: Remington 870 for IPSC
- Attachments
-
- rem870_ipsc.jpg (77.58 KiB) Viewed 9170 times
Re: Remington 870 for IPSC
Opening loading port.
- Attachments
-
- 870_loading_port_modification6.jpg (28.35 KiB) Viewed 9169 times
-
- 870_loading_port_modification5.jpg (31.24 KiB) Viewed 9169 times
-
- 870_loading_port_modification4.jpg (33.36 KiB) Viewed 9169 times
-
- 870_loading_port_modification3.jpg (34.66 KiB) Viewed 9169 times
-
- 870_loading_port_modification2.jpg (32.64 KiB) Viewed 9169 times
-
- 870_loading_port_modification.jpg (26.6 KiB) Viewed 9169 times